The Milan drive advanced is available in three sizes. These are
- MDA 35.1
- MDA 56.1
- MDA 63.1
The sizes basically vary in terms of dimensions and performance.
Versions MDA 35.1, MDA 56.1 und MDA 63.1
| Type | MDA 35.1 | MDA 56.1 | MDA 63.1 | |
| Nominal torque [Nm] | 0,7 | 1,5 | 2,0 | 4,0 |
| Peak torque [Nm] | 2,5 | 4,0 | 5,0 | 9,0 |
| Nominal output speed [rpm] | 6 000 | 3 000 | 3 000 | 3 000 |
| Maximum output speed [rpm] | 6 000 | 4 000 | 4 000 | 4 000 |
| Nominal power at nominal output speed [kW] | 0,47 | 0,47 | 0,78 | 1,26 |
| Size | MDA 35.1 | MDA 56.1 | MDA 63.1 |
| 365,0/383,0 | 423,5/448,5 | 437,5/437,5 | |
| Max. height [mm] | 195 | 215 | 215 |
| Max. width [mm] | 75 | 110 | 110 |
Special design version, bent | |||
| Size | MDA 35.1 | MDA 56.1 | MDA 63.1 |
| 229,0/247,0 | 256,5/281,5 | 270,5/270,5 | |
| Max. height | 280 | 340 | 340 |
| Max. width | 75 | 110 | 110 |
Type of enclosure
IP 64 (standard)
means protection and ingress of dust and splash water.
IP 67 (option)
means protection against ingress of dust and immersion in water up to max. 1 m head of water for the duration of max. 30 minutes.
ATEX device classification
Equipment group II, category 3, medium dust (zone 22), temperature class T4 (135°)
Corrosin protection
The housing of the Milan drive advanced is made of a high-quality corrosion-proof aluminium alloy. All other external parts such as the screws/ bolts and the motor shaft are made of stainless steel.
The finish coating is grey, other colours on request.
Ambient temperatures
– 10 °C to + 50 °C
Derating (reduction of the nominal power) from + 25 °C onwards.
A device identification code is stored in the non-volatile Milan drive advanced memory.
At GFC AntriebsSysteme, all product relevant information is accessible under this code.
Ready-made cables
Power as well as signal cables can be supplied in various ready-made lengths.
Mounted gearingOn request, the Milan drive advanced can also be supplied with mounted gearing. The gearing can either be obtained from GFC AntriebsSysteme or be made available by the customer.
The gear reduction ratio is taken into consideration in the Milan drive advanced parameter set.
Operation box
Interested users can borrow the Milan drive advanced, the operation box, ready-made cables, and the MDA-Win software for test purposes.
Inputs and outputs can directly be operated at the operation box.
Alternatively, external sensors such as end switches or reference switches can be directly connected at the operation box.
The RS 232 interface is also available at the operation box.
Documentation
The documentation consists of:
- Operation instructions for the respective controls (PROFIBUS DP, CAN-Open)
- Online help for MDA-Win
- Technical datasheet and dimension sheet
and is available in both German and English language. Other languages on request.
If required due to the installation condition, the Milan drive advanced is also available in a short special design version.
In this version, the electronics and motor are mounted next to each other and not behind each other.
